Monitoring resources

Where in the standard supports that tool design should verify tooling and record results prior to providing tooling to production?

Answer
ISO 9001:2015 clause 7.1.5 is about monitoring and measurement resources used to ensure valid and reliable results about the conformity of products and services to requirements. So, all monitoring and measurement resources used to make a decision about the final products or services should be controlled. All other monitoring and measurement resources control should be based on management decision. If your tool design department works to supply tools to production your current practice is acceptable. If your tool design department works to supply tools to outside customers, then their monitoring and measurement resources should be controlled.

The following material will provide you more information about the monitoring and measurement resources:
- Monitoring and Measurement: The basis for evidence-based decisions - https://advisera.com/9001academy/blog/2020/09/21/how-to-perform-monitoring-and-measurement-according-to-iso-9001/
- [free course] ISO 9001:2015 Foundations Course - https://advisera.com/training/iso-9001-foundations-course/
- [free course] ISO 9001:2015 Internal Auditor Course - https://advisera.com/training/iso-9001-internal-auditor-course/
- Book - Discover ISO 9001:2015 Through Practical Examples - https://advisera.com/books/discover-iso-9001-2015-through-practical-examples/